> ## Documentation Index
> Fetch the complete documentation index at: https://dronebundle.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Upload drone photos from your DJI controller

> After landing, the DroneBundle app on your controller copies the new photos off the drone, puts them on the right job and uploads them. After a mapping flight it starts the 3D map too.

> [!NOTE]
>
> Who can do this: Pilots, Operations leads, Project managers, Admins. Adding a job or starting a map from the controller needs a role that can do the same in the dashboard. On Enterprise you can also give this to a [custom role](https://dronebundle.com/help/md/roles-and-permissions.md#make-your-own-roles).

You don't need to pull the SD card or open a laptop. After you land, the DroneBundle app on your controller copies the new photos off the drone, finds the job they belong to and uploads them. After a mapping flight it also starts the 3D map.

## Before you start

- Install the app on your controller: open **dronebundle.com/app** in the controller's browser, download it and sign in. The same app uploads your flight logs, see [Get your DJI flight logs into DroneBundle](https://dronebundle.com/help/md/get-your-dji-flight-logs-in.md).
- You need an Android controller or phone (Android 8.0 or later) and a DJI drone that DJI opens to other apps. To see if yours works, switch on the drone, open **Help & Support** in the app and tap **Run the drone check**. It copies one photo and changes nothing on the drone.
- If your account is in more than one workspace, the app asks you to **Choose a workspace**. Photos and flight logs from this controller go to that one. To change it later, tap your name at the bottom left, then **Switch workspace**.

## After a flight

1. Fly with your usual flight app.
2. After landing, leave the drone switched on and close the flight app.
3. Open DroneBundle. It opens on **Flights**, connects to the drone and copies the new photos.
4. Wait for **All photos are copied. You can switch off the drone.** The upload carries on by itself.

Each flight gets a card with its job, a photo from the flight and a plot of where the photos were taken. The card says **Done** when every photo is on the job.

![The Flights screen while photos copy off the drone, with one finished flight on its job](https://dronebundle.com/assets/help/controller-photo-sync.webp)

> [!NOTE]
>
> **Not sure when to open the app?** With **Tell me when a flight has finished** switched on in **Settings**, a notice appears on the controller after landing, while your flight app is still open.

## How the app finds the job

Photos always go to a job. The app looks at where the photos were taken and finds the job at that place.

- **One job there:** the photos go to it.
- **More than one job nearby:** the card asks you to choose. Tap the right one.
- **No job there, in a Jobs only workspace:** after a mapping flight the app adds the job at that address by itself. For any other flight, tap **Create job**.
- **No job there, in a workspace with projects:** tap **Create a job here**, then choose the project and the job type. Admins and project managers can also add a **New project** right there.

If your role cannot add jobs, choose an existing job or ask a manager to add one. The photos stay on the controller until then.

> [!NOTE]
>
> **Photos on the wrong job?** Tap **Change job** on the card and pick the right one. The photos move to it. **Rename** changes the job's name.

## The map

A mapping flight is 20 or more photos taken with the camera pointing down, at a steady height. After one, the app starts a 3D map on the job as soon as the last photo is uploaded, and you get the usual notification when it is ready. [Make a map from drone photos](https://dronebundle.com/help/md/make-a-map-from-drone-photos.md) explains credits and what you get.

- To skip the map for one flight, switch off **Build a 3D map** on its card.
- To skip it for every flight, open **Settings** and switch off **Build a 3D map after a mapping flight**.
- If the job already has a map, a second one is not started.
- If your role cannot make maps, the photos still upload, and someone with access starts the map from the job.

## Earlier flights and skipping a flight

Flights from the day you signed in on this controller upload by themselves. Older ones wait under **Earlier flights**. Tap **Add this flight** to upload one.

**Skip this flight** leaves a flight out. Nothing from it is uploaded and nothing is deleted from the drone.

## Uploads and storage

- Switch on **Upload on Wi-Fi only** in **Settings** to make photos and flight logs wait for Wi-Fi. A phone hotspot counts as Wi-Fi.
- If the connection drops, the upload waits and carries on when it is back.
- Copies are removed from the controller once a flight is fully uploaded.
- The drone's card is only read. Nothing is written to it or deleted from it, so you can still pull the SD card as before.
- If a photo could not be copied, the card names it. Keep the drone switched on and tap **Try again**.

Last updated 2026-11-19. Web version: https://dronebundle.com/help/upload-photos-from-your-dji-controller
