> ## Documentation Index
> Fetch the complete documentation index at: https://dronebundle.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Connect DJI FlightHub 2 for dock flights

> Connect FlightHub 2 once and every flight from your DJI Dock arrives in DroneBundle about ten minutes after landing, linked to its job, with nothing to upload.

> [!TIP]
>
> This is only available on the [Team and Enterprise plans](https://dronebundle.com/pricing) and during the free trial.

> [!NOTE]
>
> Who can do this: Admins, Project managers. On Enterprise you can also give this to a [custom role](https://dronebundle.com/help/md/roles-and-permissions.md#make-your-own-roles).

Works with DJI Dock, Dock 2 and Dock 3. On DJI's side you need the FlightHub 2 Enterprise plan. Nothing is installed on the dock or the controller, and it works for operators in the US.

## Connect

1. In DroneBundle, click **Integrations** in the sidebar, then **DJI FlightHub 2**.
2. Click **Add connection**. A panel shows your four connection details: host, port, username and password. Click any value to copy it.
3. In FlightHub 2, sign in as an organization administrator, open **My Organization**, click the settings gear, then **FlightHub Sync**.
4. Open **Device Information Synchronization (MQTT Bridge)**, switch **Forwarding** on and click **Configure Server**.
5. Paste in the host, port, username and password, click **Test Connection**, then **Save and Connect**.

The connection shows **Waiting for FlightHub** until the first message arrives, then turns to Connected on its own.

![The DJI FlightHub 2 connection page with the values to paste into FlightHub Sync](https://dronebundle.com/assets/dronebundle/flighthub-sync-setup.webp)

> [!NOTE]
>
> **Keep the password private.** It can only send flights in and cannot read anything, but FlightHub 2 sends it without encryption. You can show it again or replace it from the connection page at any time.

## What happens after each flight

- The flight appears under Flight Logs about ten minutes after landing, with a Dock badge.
- It links itself to a job: first the job the dock is attached to as equipment, then a job or project whose area the flight crossed. If neither fits, it waits as unlinked and you get a notification.
- If a scheduled flight on that job covers the takeoff time, it is marked flown and credited to the pilot rostered on it.
- The dock, aircraft and batteries are added to Equipment the first time, and flight hours and battery cycles feed your maintenance counters.

A workspace can have up to ten connections. Disconnecting stops new flights within the hour. Flights already received stay.

Last updated 2026-11-17. Web version: https://dronebundle.com/help/connect-dji-flighthub-2
